/
Perforated Card Stock Configuration
Perforated Card Stock Configuration
- Joe Large (Unlicensed)
Owned by Joe Large (Unlicensed)
Test slip printed to 4” x 3” Perforated Paper
Requires VDS PrintManager v1.4.0.181 or later
Requires Zebra Perforated Card stock (4” x 3”)
Open Zebra printer driver Advanced configuration
Enable rotate 180 degrees
Set Width: 4.00 and Height: 3.00
Set Tracking Mode to Web Sensing
Settings > Devices > Printers & Scanners
Enable the Fixed Height paper setting in VDS PrintManager
Open VDS PrintManager
Under Registered Printers select the Zebra printer and open Paper Settings
3. Set the Paper Type to Fixed Height
4. Click Save
, multiple selections available,
Related content
Zebra GK420/ZD420/ZD421 Continuous Roll Configuration
Zebra GK420/ZD420/ZD421 Continuous Roll Configuration
More like this
EPSON TM-T20II
EPSON TM-T20II
More like this
Printer Installation & Setup
Printer Installation & Setup
More like this
Register a printer for PerfectPass
Register a printer for PerfectPass
More like this
Zebra ZQ310 Mobile Printer Setup
Zebra ZQ310 Mobile Printer Setup
More like this
Release Notes
Release Notes
More like this
Questions? Contact us at support@visiondatabase.com