Printer Installation & Setup

To print pass, warning, and detention slips from PerfectPass there are a few steps that must be completed. If you have questions along the way please contact Support for assistance.

Station Setup

Each printer you connect to PerfectPass will be assigned a “Station” name during setup.

The Station name is user-defined and some examples are: “Front Office”, “Media Center”, “Kiosk 1”, etc.

When a user signs in to PerfectPass they will be prompted to select a Station and print slips will be routed to that Station’s assigned printer. It is possible for multiple users to select the same Station which allows slip prints to be routed to a single printer.

The following link contains instructions to create and edit station names.

Stations

Install the printer

Zebra GK420 / ZD421 - Continuous Roll / Perforated Card Stock

Epson - TM-T20II

Install PrintManager

The PrintManager software is installed onto your Windows workstation and listens for print jobs sent from PerfectPass.

Install VDS PrintManager

Register the printer

After PrintManager is installed the next step is open the software and register the printer.

Register a printer for PerfectPass

 

 

 

 

 



 

Questions? Contact us at support@visiondatabase.com