/
Perforated Card Stock Configuration

Perforated Card Stock Configuration

Owned by Joe Large (Deactivated)
Last updated: Sep 24, 2021
2 min read
Test slip printed to 4” x 3” Perforated Paper

 

  • Requires VDS PrintManager v1.4.0.181 or later

  • Requires Zebra Perforated Card stock (4” x 3”)

 

Open Zebra printer driver Advanced configuration

  1. Enable rotate 180 degrees

  2. Set Width: 4.00 and Height: 3.00

  3. Set Tracking Mode to Web Sensing

 

Settings > Devices > Printers & Scanners
Printer Properties > Advanced > Printing Defaults

 

 

Printing Defaults > Options
Printing Defaults > Advanced Setup

 

Enable the Fixed Height paper setting in VDS PrintManager

  1. Open VDS PrintManager

  2. Under Registered Printers select the Zebra printer and open Paper Settings

 

 

3. Set the Paper Type to Fixed Height

4. Click Save

 

Related content

Questions? Contact us at support@visiondatabase.com